Water-washed kaolin BM K88 for coatings

The K series products are specially designed for water-based coatings production. They feature high whiteness, good hiding power, smoothness, excellent thixotropy, anti-settling properties, and excellent adhesion. They effectively improve the storage stability and anti-water separation performance of coatings, improve pigment floating and blooming, and enhance pigment tinting strength. They also improve the anti-sagging properties during application, increase the fullness of the paint film, enhance the smoothness of the paint film, and enhance the UV resistance of the coating. They bring more balanced performance and a more advantageous competitive edge to water-based coatings, serving as both extender pigments and multifunctional additives in water-based coatings.

Water-washed kaolin clay BM K89 for coatings

The K series products are specially designed for water-based coatings production. They feature high whiteness, good hiding power, smoothness, excellent thixotropy, anti-settling properties, and excellent adhesion. They effectively improve the storage stability and anti-water separation performance of coatings, improve pigment floating and blooming, and enhance pigment tinting strength. They also improve the anti-sagging properties during application, increase the fullness of the paint film, enhance the smoothness of the paint film, and enhance the UV resistance of the coating. They bring more balanced performance and a more advantageous competitive edge to water-based coatings, serving as both extender pigments and multifunctional additives in water-based coatings.

BM M70 Adhesive Clay

The M series clay is a functional filler developed specifically for the adhesive industry. It features excellent fineness and suspension properties, is resistant to sedimentation and stratification, exhibits good fluidity, fast drying speed, and good hardness, bringing more balanced performance and a competitive advantage to adhesives. The M series kaolin products are divided into four viscosity grades, allowing customers to choose freely based on formulation and cost factors.

BM M80 Adhesive Clay

The M series clay is a functional filler developed specifically for the adhesive industry. It features excellent fineness and suspension properties, is resistant to sedimentation and stratification, exhibits good fluidity, fast drying speed, and good hardness, bringing more balanced performance and a competitive advantage to adhesives. The M series kaolin products are divided into four viscosity grades, allowing customers to choose freely based on formulation and cost factors.

Fine-washed kaolin BM P60

The P series products are mainly used in the papermaking industry, water-based inks, leather adhesives, cosmetics, pesticides, etc. They have advantages such as high whiteness, easy dispersion, uniform particle size distribution, and stable viscosity. In the papermaking field, they provide paper with good covering performance and coating gloss, and can also increase the whiteness, opacity, smoothness, and printability of the paper, greatly improving the quality of the paper products. At the same time, in water-based ink applications, it can enhance the surface abrasion resistance of the ink, prevent ink penetration, prevent the generation of printing watermarks, accelerate drying speed, improve the printing quality of the ink, and appropriately increase the viscosity and solid content of the ink, playing a certain anti-settling role. It is also widely used in water-based coatings.

Calcined kaolin BM V60 for coatings

V-series calcined kaolin is refined using wet stripping, calcination, and classification techniques. It features high whiteness, pure color, good suspension, narrow particle size distribution, easy dispersion, strong hiding power, and low oil absorption. In latex paints, it provides excellent color extension, improves the anti-floating and blooming properties of pigments, enhances the fullness, abrasion resistance, and stain resistance of the paint film, and improves the storage and opening appearance of the coating. Due to its good hiding power, it can reduce the amount of expensive titanium dioxide, significantly reducing the cost of coatings. This product is widely used in latex paints, powder coatings, anodic and cathodic electrophoretic paints, road marking paints, etc.

Calcined kaolin BM V90 for coatings

V-series calcined kaolin is refined using wet stripping, calcination, and classification techniques. It features high whiteness, pure color, good suspension, narrow particle size distribution, easy dispersion, strong hiding power, and low oil absorption. In latex paints, it provides excellent color extension, improves the anti-floating and blooming properties of pigments, enhances the fullness, abrasion resistance, and stain resistance of the paint film, and improves the storage and opening appearance of the coating. Due to its good hiding power, it can reduce the amount of expensive titanium dioxide, significantly reducing the cost of coatings. This product is widely used in latex paints, powder coatings, anodic and cathodic electrophoretic paints, road marking paints, etc.

Cellulose BM H3000 for coatings

BM H3000 features fast dissolution, low foaming, good thickening effect, good color development, and better stability. It has excellent anti-splashing properties, good anti-sagging performance, is stable over a wide pH range, and allows for a wide range of formulations. Its superior performance is achieved by controlling hydration through adding it to water before starting pigment grinding. It is mainly developed for use in the production of emulsion paints and requires a smaller dosage than other thickeners.

Cellulose BM H4000 for coatings

BM H4000 hydroxyethyl cellulose is a water-soluble cellulose ether made from natural cellulose as the main raw material through chemical reaction. It is an odorless, tasteless, non-toxic white or light yellow free-flowing granular powder, a non-ionic cellulose ether. It has thickening, binding, emulsifying, dispersing, and stabilizing effects, and can retain moisture, form films, and provide protective colloid effects. It is easily soluble in cold and hot water, can provide solutions with a wide viscosity range, is a thickener for high-concentration electrolyte solutions, has twice the water retention of methyl cellulose, and has good flow regulation.

BM T78, a special high-grade kaolin for ceramic washing

Selected ceramic products, using high-quality kaolin for washing, are characterized by high whiteness, fine particle size, and good suspension, widely used in the ceramic glaze industry. These products can improve the surface properties of ceramic bodies and reduce porosity. They also help improve the suspension of glazes, improve slurry properties, and the uniformity of glaze coatings.

BM T81, a high-quality kaolin clay specifically for ceramic washing

Selected ceramic products, using high-quality kaolin for washing, are characterized by high whiteness, fine particle size, and good suspension, widely used in the ceramic glaze industry. These products can improve the surface properties of ceramic bodies and reduce porosity. They also help improve the suspension of glazes, improve slurry properties, and the uniformity of glaze coatings.

BM M60 Adhesive Clay

The M series clay is a functional filler developed specifically for the adhesive industry. It features excellent fineness and suspension properties, is resistant to sedimentation and stratification, exhibits good fluidity, fast drying speed, and good hardness, bringing more balanced performance and a competitive advantage to adhesives. The M series kaolin products are divided into four viscosity grades, allowing customers to choose freely based on formulation and cost factors.

Fine-washed kaolin BM P800

P series products are characterized by high whiteness, fine particle size, easy dispersion, low abrasion, excellent suspension, and good softness. They are widely used in the ink and pigment industry. They can enhance the abrasion resistance of pigments, improve the coloring and compatibility of pigments, prevent blooming, floating, and sedimentation, and can also adjust the drying speed and improve printing quality.

BM-02 Ceramic-Specific Water-Washed Kaolin

Selected ceramics. The special water-washed kaolin series has good fineness, good suspension, is not easy to settle and stratify, and has good fluidity. In the adhesive industry, it has a fast drying speed, good hardness, and low cost. It is also widely used in the ceramics and rubber industries.

BM-04 Ceramic-Specific Water-Washed Kaolin

Selected ceramics. The special water-washed kaolin series has good fineness, good suspension, is not easy to settle and stratify, and has good fluidity. In the adhesive industry, it has a fast drying speed, good hardness, and low cost. It is also widely used in the ceramics and rubber industries.

< 1 >

Providing solutions for your industry

If you are interested in our products, please leave your email.

%{tishi_zhanwei}%

Contact Us

Address: Guangzhou Yongning Street Zengcheng City Hejing Fitch Hill International Rongjing Road No. 10 9 floor
Contact Person:Luo Peng (Marketing Manager)      Contact Number:+86-139 2507 2669  

Service Hotline:+86 400 020 8111    Tel:+86-020-2622 8248    Fax: +86-020-2622 8648

E-mail:inbonny@inbonny.com

QR Code

Follow WeChat Official Account
Weekly updates
Check the company's latest news and industry information anytime

QR Code


Douyin ID: INBONNY

21 years focusing on the production, research and development, and application of kaolin new materials


Business License

Providing solutions for your industry

If you are interested in our products, please leave your email.

Submit Message